Hp BH3710 Manual do Utilizador Página 1

July 2002 Manufacturing Part Number: Version: First Edition USA Copyright 2002 HP Blade Server BH Series Operating System Guide

10 Procedure Create a Stand-alone Microsoft Windows 2000 Remote Install Server Requirements • A stand-alone server connected to the blade LAN. The

11 A. Install the Microsoft Windows 2000 Advanced Server to Create a RIS and DHCP Server Booting the System Boot the system using the Microsoft Wind

122. The Installing Devices screen will be shown with a progress bar on the display. This may take 10 to 15 minutes. Note: If you see a dialog box

13Install the Service Pack 7. REQUIRED - Apply Service Pack 2 (or later). Failure to perform this step, may cause RIS to fail later in this procedu

14 B. Initialize Storage Drive (This is the drive being used to store the RIS image) To start the disk administrator use the following procedure. 1.

15 C. Setup NIC to use a Static IP Address 1. Right-click on My Network Places | Properties. 2. Right-click on Local Area Connection | Propertie

16 4. Select the “Use the following IP Address” radio button. Enter appropriate IP address and subnet mask (e.g. IP: 100.1.1.l, Subnet: 255.255.255

17 D. Promote System to Domain Controller. 1. Click Start | Run and enter the command: dcpromo. 2. Click Next at the "Active Directory Inst

18 3. Domain Controller Type: accept default "Domain Controller for a new Domain". Next. (default)

19 4. Create Tree or Child Domain: accept default "Create a new domain tree. Select Next. (default)

2Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to

20 5. Create or Join Forest: accept default "Create a new forest of domain trees" and click Next. (default)

216. New Domain Name: "Full DNS name for new domain:" type in the assigned DNS name for your server (For example, win2kris.com). 7. Cl

22 8. NetBIOS Domain Name: accept default "Domain NetBIOS name”. Click Next. (default)

239. Database and Log Locations: accept default values: Database Location: C:\WINNT\NTDS Log Location: C:\WINNT\NTDS. Click Next. (default)

2410. Shared System Volume: accept default values: Folder Location: C:\WINNT\SYSVOL. Click Next. (default) 11. The system will display a dialog b

25 Configure DNS Server 12. Configure DNS: Select the “Yes, Install and configure DNS on this computer” radio button. Click Next to continue. (defau

26 14. Enter the Administrator password and click Next to continue. NOTE: If you get an error message stating that system cannot connect to domai

2715. Review the Summary display and click Next to continue (default) 16. The system will start configuring the active directory display. This w

2817. If prompted, insert Microsoft Windows 2000 CD-ROM and click OK to continue. 18. Configuring the active directory display shows again. Click F

29 E. Install DHCP and Remote Installation Services Components. 1. Click Start | Settings | Control Panel. 2. Double-click on Add/Remove Program

3Preface Overview Blade servers are comprehensive computing systems that include processor, memory, network connections, and associated electronics,

30 Download and Install the Microsoft Patch for RIS NOTE Step 6 and step 7 are required with the installation of Service Pack 2. These two steps al

31NOTE: The three Windows screens on this page will be seen only if you did not previously configure the NIC with a static IP address.

32F. Configure DHCP. 1. Click Start | Programs | Administrative Tools | DHCP. 2. Click on your server name. Click on Action | New Scope. This d

333. For the Scope Name window, enter a name and description. Click Next. 4. IP Address Range: Specify a Start IP Address and End IP Address.

345. Add Exclusions: Click Next. (default)

356. Lease Duration: Click Next. (default) 7. Configure DHCP Options: Select No (default is yes). Click Next.

36 8. Click Finish 9. Click on your server name. Click on Action | Authorize. 10. Click on your Scope. Click on Action | Activate. 11. Click o

37G. Configure Remote Installation Services NOTE Read entire section before proceeding. OVERVIEW Remote Installation Services is designed to insta

385. Remote Installation Services Setup Wizard: Click Next. (default) NOTE The remote installation services must reside on a different physical

39 6. For the remote installation folder location, do not place the path on the root drive (i.e. C: drive). that has the OS already on it. The best

41 Using Linux-Based Server Blades Overview The information in this chapter was previously contained in the HP Blade Server bh7800 Installation Gui

40 7. Initial Settings: Check “Respond to client computers requesting service”. Click Next. 8. Installation Source Files Location: Assuming t

41 9. Optional - For the Microsoft Windows Installation Image Folder name, if another Microsoft Windows product is desired, suggested names are: •

42 10. For the “Friendly description:” and for the “Help Text:” areas, verify the description and the text. After the patch is installed, the defaul

43 11. At the “Review Settings” window, click Finish. 12. Click Done. 13. Close Add/Remove Programs window.

44H. Use RIS to install Microsoft Windows 2K Adv Server to the Blade Server 1. Connect stand-alone RIS server to same network as the bc1100 is on.

45Verify the bc1100 will start-up using the Intel Boot Agents Version 3.0.03 3. Press the F2 key at start-up.

464. The window below is the “System Configuration Summary” after selecting the F2 key. Select F4-BOOT OPTIONS to continue.

475. Change the boot order so “Intel ® Boot Agent Version 3.0.03” is at the top of the list as shown below in the “Boot Options Configuration Utilit

48 6. Press the ESC key to return to the left hand menu. Select F10-EXIT. Press ENTER This action displays the following dialog box. Press ENTER

498. When the bc1100 server blade connects to the RIS, you will see the following Microsoft Windows RIS installation screen, “Client Installation Wi

5the prompt for now. f. You see a blinking underscore for less than a minute, as the blade tries unsuccessfully to boot from a “Removable Device” (

50 9. Next, log into the RIS server. Change fields using the Tab key. NOTE: The username discussed on this screen is the username that you use to

51 10. Below is the first of several screens to appear during the RIS Windows 2000 Advanced Server install. Press Enter to continue.

52 11. At the screen below, press Enter to continue. Soon the installation will start formatting the bc1100 disk. You will see the standard Micro

53System Administration Configuration Checklist 13. During the reboot, use the F2 key to enter the bc1100 BIOS setup screens to change the boot orde

5416. Install the latest Service Pack and the latest upgrades pertinent to your environment. 17. Insert the storage blade into the chassis. Microso

55I. Establishing a Remote GUI Session The Microsoft Windows 2000 operating system is loaded. Next, set up a remote Graphical User Interface (GUI)

56 7. Login as "Administrator" after the system has rebooted. 8. You must create installation disks for the Terminal Services client. 9

57 10. Follow the on-screen instruction, insert Disk2 when prompted to do so. 11. Click OK when done. Establishing Terminal Services Connection 1.

58Symantec pcAnywhere Installation Overview pcAnywhere uses a server-client relationship. It supports several connection types such as network, mod

59 J. Disable Hibernation Mode After the Microsoft Windows 2000 operating system is installed, the hibernation mode must be turned off. 1. Select

6 Table 1-1: Pre-configured Server Blade IP Addresses Blade location in bh7800 chassis IP Address Rear slot 2 192.168.1.2 Front slot 3 192.168.1.

60 3. Select the Hibernate tab as shown below. 4. Ensure that the check box under Hibernate is blank as shown in the screen capture shown above.

61K. Microsoft Windows 2000 RMC Driver Installation 1. Go to Start | Setting | Control Panel 2. Double click on System

623. Select Hardware tab 4. Click on Device Manager

63 5. Double click on the Unknown PCI Device 6. Select Driver tab

647. Click on Update Driver 8. An “Upgrade Device Driver Wizard” will open, click Next

65 9. Do not let Microsoft Windows search for the driver. Select “Display a list of known drivers for this device so that I can choose a specific dr

6611. In the “Select a Device Driver Wizard”, scroll down the Manufacturers list until you find Hewlett-Packard. There will be 2 entries for HP, sel

6715. Click Finish. 16. Click Close to close the device property menu. 17. Notice that the unknown PCI Device is now named "HP TopToo

68General Notes Multi Step Process for Individual Server Blade Shutdown 1. Shutdown the Microsoft Windows 2000 operating system. Select Start | Shu

693 Using HP-UX-Based Server Blades OVERVIEW HP-UX information for blade servers is contained in documentation released prior to this book. This c

7 f. You return to the Linux prompt for the server blade located in front slot 1. g. Repeat steps 4a. through step 4f. for the remaining server bl

8 Manuals for the bh7800 are available online at http://docs.hp.com/hpux/hw/ For information on the Toptools agents for bh7800, see the Web site at

92 Using Windows-Based Server Blades Before You Begin Make sure you have the following items before you begin the installation process: • Microsoft