HP Switch 6208M-SX Manual do Utilizador descarregar pdf (Página 111)

100

101

Installation and Getting Started Guide

2. Click on the plus sign next to Configure in the tree view to display the configuration options.

3. Select the STP

link to display the STP bridge and port parameters.

4. Click the Modify button in the STP port parameters table to display the STP configuration panel, as shown in

the following example. If the device has multiple port-based VLANs, select the Modify button next to the

VLAN on which you want to change the parameters. A dialog such as the following is displayed.

5. Select the port (and slot if applicable) from the Port and Slot pulldown lists.

6. Enter the desired changes to the priority and path cost fields.

7. Click Apply STP Port to apply the changes to only the selected port or select Apply To All Ports to apply the

changes to all the ports.

NOTE: If you want to save the priority and path costs of one port to all other ports on the device or within the

selected VLAN, you can click the Apply To All Ports button.

8. Select the Save link at the bottom of the dialog. Select Yes when prompted to save the configuration change

to the startup-config file on the device’s flash memory.

5 - 6

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 709 710

Comentários a estes Manuais

Sem comentários

HP Switch 6208M-SX Manual do Utilizador Página 111

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP Switch 6208M-SX