HP 3C339 Manual do Utilizador

TokenLink Velocity PCI Network Interface Card3C339Installation Guide

2 Connecting to a Netware 4.11 ServerWindows 95 SR210 Insert the 3C339 drivers diskette and set path to “A:\” and hit Enter. (If you have a Hewlett-P

3 Connecting to a Windows NT Server 3.51Windows for Workgroups Ver. 3.113 Connecting to a Windows NT Server 3.51Windows for Workgroups Ver. 3.11Requi

3 Connecting to a Windows NT Server 3.51Windows for Workgroups Ver. 3.11❒ C:\WINDOWS❒ No9 Under the heading “Select the driver for your network board”

3 Connecting to a Windows NT Server 3.51Windows 95 SR2Windows 95 SR2 Requirements• HP Vectra VE7/VE8with Windows 95 SR2.• 3COM TokenRing 3C 339 card

3 Connecting to a Windows NT Server 3.51Windows 95 SR210 In the “Network” dialog box , click on the “Add” button .11 In the “Select Network Component

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 3.51Windows NT Workstation Version 3.51Requirements• HP Vectra VE7/VE8 with Mi

3 Connecting to a Windows NT Server 3.51Windows NT Workstation Version 3.519 Double click on the “Network” icon and agree to install Windows NT Netwo

3 Connecting to a Windows NT Server 3.51Windows NT Workstation 4.0Windows NT Workstation 4.0Requirements• HP Vectra VE7/VE8 with Microsoft Windows NT

3 Connecting to a Windows NT Server 3.51Windows NT Workstation 4.09 Double click on the “Network” icon and agree to install Windows NT Networking on

4. Connecting to a Windows NT Server 4.0Windows for Workgroups Ver. 3.114. Connecting to a Windows NT Server 4.0Windows for Workgroups Ver. 3.11Requi

NoticeThe information contained in this document is subject to change without notice.Hewlett-Packard makes no warranty of any kind with regard to this

4. Connecting to a Windows NT Server 4.0Windows for Workgroups Ver. 3.11❒ C:\WINDOWS❒ No9 Under the heading “Select the driver for your network board”

4 Connecting to a Windows NT Server 4.0Windows 95 SR2Windows 95 SR2 Requirements• HP Vectra VE7/VE8with Windows 95 SR2.• 3COM TokenRing 3C 339 card an

4 Connecting to a Windows NT Server 4.0Windows 95 SR210 In the “Network” dialog box , click on the “Add” button .11 In the “Select Network Component T

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version 3.51Windows NT Workstation Version 3.51Requirements• HP Vectra VE7/VE8 with Micr

4 Connecting to a Windows NT Server 4.0Windows NT Workstation Version 3.519 Double click on the “Network” icon and agree to install Windows NT Network

4 Connecting to a Windows NT Server 4.0Windows NT Workstation 4.0Windows NT Workstation 4.0Requirements• HP Vectra VE7/VE8 with Microsoft Windows NT W

4 Connecting to a Windows NT Server 4.0Windows NT Workstation 4.09 Double click on the “Network” icon and agree to install Windows NT Networking on yo

4 Connecting to a Windows NT Server 4.0Windows NT Workstation 4.0

4 Connecting to a Windows NT Server 4.0Windows NT Workstation 4.0

1 Connecting to a Netware 3.12 ServerWindows for Workgroups1 Connecting to a Netware 3.12 ServerWindows for WorkgroupsRequirements• HP Vectra VE7/VE8

Version Number 3COM 339 Rev.1

1 Connecting to a Netware 3.12 ServerWindows for Workgroups7 Execute INSTALL.EXE.8 Specify the settings as listed below:❒ C:\NWCLIENT❒ Yes❒ Yes❒ C:\WI

1 Connecting to a Netware 3.12 ServerWindows 95 SR2Windows 95 SR2 Requirements• HP Vectra VE7/VE8 with Windows 95 SR2 installed.• 3COM 3C 339 Token R

1 Connecting to a Netware 3.12 ServerWindows 95 SR2(If you have a Hewlett-Packard pre-loaded HDD, set the path statement to “C:\MASTERS\LANDRV\3C509B

2 Connecting to a Netware 4.11 ServerWindows for Workgroups2 Connecting to a Netware 4.11 ServerWindows for WorkgroupsRequirements• HP Vectra VE7/VE

2 Connecting to a Netware 4.11 ServerWindows for Workgroups7 Execute INSTALL.EXE.8 Specify the settings as listed below:❒ C:\NWCLIENT❒ Yes❒ Yes❒ C:\WI

2 Connecting to a Netware 4.11 ServerWindows 95 SR2Windows 95 SR2 Requirements• HP Vectra VE7/VE8 with Windows 95 SR2 installed.• 3COM 3C 339 Token R