HP B210A Guia do Utilizador descarregar pdf (Página 7)

Fixing connectivity issues

Run a Wireless Network Testtocheckdiagnosticandcongurationinformation.Todothis:

1. On the HP Photosmart control panel, press the Wireless button to display the Wireless menu

on the printer display.

2. Select Run Wireless Network Test on the display.

3. The Wireless Network Test Report is automatically printed.

You may have picked the wrong network or typed in your network name (SSID)

incorrectly.

• Check these settings to ensure that they are correct.

You may have typed in your wireless password (WPA passphrase or WEP key)

incorrectly.

• If you are using encryption on your network, you’ll need to enter a key. These are

case-sensitive so be sure to enter them correctly. These settings might be found for you

automatically during software installation.

• If the network name (SSID) or the WPA passphrase/WEP key are not found automatically

during installation, and you don’t already know them, you can download the Network

Diagnostic Utility, which can help you locate them.

• The Network Diagnostic Utility runs on computers with Windows XP SP3, Vista, or

Windows 7. The computer should also be wirelessly connected to your network. To

download the Network Diagnostic Utility, go to: www.hp.com/go/wirelessprinting.

You may have a router problem.

• Try restarting both the printer and the router by turning off the power on each. Then, turn

them on again.

Your computer may not be connected to your network.

• Make sure that the computer is connect to the same network to which the HP Photosmart is

connected.

Your computer may be connected to a Virtual Private Network (VPN).

• Temporarily disconnect from the VPN before proceeding with the installation. Being

connected to a VPN is like being on a different network. You will need to disconnect from

the VPN to access the printer over the home network.

Security software may be blocking communication.

• Securitysoftware(rewall,anti-virus,anti-spyware)installedonyourcomputermaybe

blocking communication between the printer and the computer. An HP diagnostic utility

runs automatically during installation and can provide messages about what might be

blockedbyarewall.Trytemporarilydisablingyourrewall,anti-virus,oranti-spyware

applicationstoseeifyoucannishtheinstallationsuccessfully.Forfurthersupport,goto:

www.hp.com/go/wirelessprinting to download the Network Diagnostic Utility, then run it.

You should re-enable the security applications after installation is complete.

• SetupyourrewallsoftwaretoallowcommunicationoverUDPport427(Windows).

After software installation

If your printer has been successfully installed, but you are having trouble printing:

• Turn off the router, printer, and computer. Then, turn on router, printer, and computer -- in

that order.

• If powering down and up doesn’t solve the problem, run the Network Diagnostic Utility

(Windows):

• Go to: www.hp.com/go/wirelessprinting to download the Network Diagnostic Utility,

then run it.

English

1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários

HP B210A Guia do Utilizador Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com Pontes e repetidores wireless HP B210A