Hp Compaq Integrated Smart Array Controller Manual do Utilizador Página 87
- Página / 147
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Compaq Array Configuration Utility 6-19
Compaq Confidential – Need to Know Required
Writer: CDresden Project: Compaq Integrated Smart Array Controller User Guide Comments:
Part Number: 153236-001 File Name: g-ch6 Compaq Array Configuration Utility.doc Last Saved On: 8/27/99 11:25 AM
Online RAID and Stripe Migration
Using CPQONLIN, you can modify both the RAID level and stripe size of an
existing logical drive while online. To migrate a drive, select the drive setting
option under the logical drive menu for the drive you wish to modify. Select
the new RAID level and/or stripe size from the choices presented to you. If the
new settings are valid, the migration begins when you save your changes.
Failed Drives or Interim Recovery Mode
If a drive fails and hardware fault tolerance is enabled, system operations
continue. Replace the drive as soon as possible. To recover a drive and use the
failed drive in the interim, select a logical drive and press F3 to monitor the
status of drive recovery, as shown in the figure below.
Figure 6-15. Logical Drive Information screen
■ Interim Recovery
The logical drive is operating, but a failed drive has not been replaced.
Replace the failed drive as soon as possible.
■ Ready for Recovery
The logical drives are queued for recovery. This status is displayed
when another logical drive is already rebuilding or expanding.
- User Guide 1
- Part Number 153236-001 1
- Compaq Computer Corporation 1
- Contents 3
- Chapter 2 4
- Chapter 3 4
- Chapter 4 4
- Chapter 5 4
- Chapter 6 5
- Appendix A 6
- Appendix B 6
- Appendix C 7
- About This Guide 9
- Symbols in Text 10
- Symbols on Equipment 10
- Rack Stability 11
- Getting Help 12
- Compaq Website 13
- Compaq Authorized Reseller 13
- Controller Features 15
- Controller Interface 16
- Drive Array Technology 17
- Fault Tolerance 18
- Drive Movement 18
- Read-Cache Memory 18
- Wide Ultra2 SCSI Technology 19
- Configuration Utilities 20
- Controller 23
- External Cabling 25
- External Cables 26
- Configuring the Controller 28
- Updating Firmware 29
- ROMPaq Diskettes 30
- Running System ROMPaq 31
- Running Options ROMPaq 33
- Option ROM Configuration 35
- Initial Start Screen 36
- Create Logical Drive Screen 37
- Confirmation Screen 38
- Before Installing Drivers 42
- Materials Needed 42
- Operating Systems 43
- (PAS) Diskettes 44
- C:\DIR\SPXXXX.exe 45
- A:\README 45
- Novell NetWare 46
- Installation Procedure 47
- Microsoft Windows NT 4.0 49
- README.BAT 50
- A:\README.BAT 50
- A:\SETUP 51
- Microsoft Windows 2000 54
- SmartStart 55
- The Internet 55
- Installing the Driver 56
- SCO OpenServer 5 57
- Compaq SCO OpenServer 5 58
- SCO OpenServer 5 (Non-Compaq) 58
- SCO UnixWare 2.1 or Later 59
- IBM OS/2 60
- Controller Ordering 62
- Partitioning 63
- Controller Drive 63
- Command Line Switches 64
- BASEDEV=CPQARRAY.ADD /A:2 /I 65
- Banyan VINES 7.0 or Later 66
- Before You Begin 70
- Running the Compaq 70
- Array Configuration Utility 70
- ACU Online 71
- Microsoft Windows NT 71
- Configuration Wizards 72
- Online Help 72
- Main Configuration Screen 73
- Menu Bar 74
- Controller Selection Frame 75
- More Information Bar 76
- Drive View Buttons 76
- Controller Buttons 76
- Array Buttons 77
- Logical Drive Button 77
- Controller Settings Screen 78
- Create Drive Array Screen 79
- Array Accelerator Frame 81
- Stripe Size 81
- Table 6-1 82
- Stripe Size Fault Tolerance 82
- Autoconfiguration 82
- Custom Configuration 83
- Drive Rebuild 85
- Priority Settings 86
- Accelerator Ratio 86
- Expand an Array 86
- Add or Configure Spare Drives 86
- ■ Interim Recovery 87
- ■ Ready for Recovery 87
- Handling Disk Drive Failures 88
- Configuration Procedures 90
- Grouping Physical Drives 92
- Figure 6-20. Example Array B 93
- Expanding Capacity 97
- Capacity Extension 100
- Extending Logical Drives 101
- Online Migration 102
- Online Stripe Size Migration 103
- Errors and Warnings 104
- Electrostatic Discharge 105
- Grounding Methods 106
- Understanding Drive Arrays 107
- Drive Arrays 110
- Logical Drives 110
- Drive Array Benefits 111
- Table B-1 112
- RAID Level Characteristics 112
- P = Parity 113
- Drive Mirroring and Striping 114
- (RAID 1 and RAID 0+1) 114
- No Fault Tolerance (RAID 0) 115
- Online Spares 115
- Performance Enhancement 116
- Optimized Request Management 117
- Bus Master Data Transfers 118
- Adding Storage Capacity 119
- ■ Hot-plug hard drives 121
- Data Reliability 122
- Dynamic Sector Repairing 123
- Drive Parameter Tracking 123
- Drive Failure Alert Features 123
- Interim Data Recovery 123
- Automatic Data Recovery 124
- Hot-Plug Drives 124
- Recovering from Drive Failure 126
- Recognizing a Drive Failure 127
- Replacing a Failed Drive 129
- Compromised Fault Tolerance 131
- Questions and Answers 133
Manuais e produtos relacionados com Acessórios para Computador Hp Compaq Integrated Smart Array Controller
Acessórios para Computador Hp Single Channel Ultra320 SCSI G2 Host Bus Adapter Manual do Utilizador
(29 páginas)
(29 páginas)
Acessórios para Computador Hp NC382i Integrated Dual Port PCI Express Gigabit Se Manual do Utilizador
(25 páginas)
(25 páginas)
Acessórios para Computador Hp 3PAR Application Software Suite for Oracle License Manual do Utilizador
(199 páginas)
(199 páginas)
Acessórios para Computador Hp Hitachi Dynamic Link Manager Software Licenses Manual do Utilizador
(646 páginas)
(646 páginas)
Acessórios para Computador Hp CD-Writer Plus Internal 8110i Drive Manual do Utilizador
(171 páginas)
(171 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.038 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais