Hp Smart Array 6i Controller and 128MB BBWC Manual do Utilizador descarregar pdf (Página 21)

Using the Battery-Backed Write Cache Option 21

For more information about battery replacement or proper disposal, contact an

authorized reseller or an authorized service provider.

To replace the battery pack:

1. Power down the server.

2. Remove the cache module from the server.

3. If the cache cable is not already fully extended, unwind it from around the

battery pack.

4. Push the plastic retainer tabs through the slots in the battery case (1).

5. Tilt the battery pack away from the battery case (2). (The angle is

exaggerated in the drawing for clarity.)

6. Press down on the battery pack to expel the lower lip on the battery pack

from the slot in the battery case (3).

The battery pack drops out of the case.

To install the new battery pack, reverse this procedure.

IMPORTANT: After installing the new battery pack and replacing the

BBWC module in the server, it may take up to 45 minutes for the battery

to recharge and the BBWC to become fully enabled.

HP CONFIDENTIAL

File Name: 347914-1.doc Last Saved On: 1/26/04 9:31 AM

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

Sem comentários

Hp Smart Array 6i Controller and 128MB BBWC Manual do Utilizador Página 21