Hp ProLiant MicroServer Gen8 Manual do Utilizador Página 44
- Página / 95
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Hardware options installation 44
To configure arrays, see the HP Smart Storage Administrator User Guide on the HP website
(http://www.hp.com/go/smartstorage/docs).
Installing the FBWC module and capacitor pack
CAUTION: In systems that use external data storage, be sure that the server is the first unit to be
powered down and the last to be powered back up. Taking this precaution ensures that the system
does not erroneously mark the external drives as failed when the server is powered up.
To install the component:
1. Power down the server (on page 15).
2. Disconnect the power cord from the AC source.
3. Disconnect the power cord from the server.
4. Remove the chassis cover (on page 19).
5. Install the storage controller ("Installing a storage controller" on page 43).
6. Install the cache module on the storage controller.
7. Install the capacitor pack:
a. Open the capacitor pack holder.
b. Position the capacitor pack between the two vertical tabs near the holder.
c. Close the capacitor pack holder.
- HP ProLiant MicroServer Gen8 1
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 6
- Front panel LEDs and buttons 7
- Rear panel components 8
- Rear panel LEDs and buttons 9
- System board components 9
- Item Description 10
- DIMM slot locations 11
- System maintenance switch 11
- Drive numbering 12
- FBWC module LED definitions 13
- Fan location 14
- T-10/T-15 Torx screwdriver 14
- Operations 15
- Open the front bezel 16
- Remove the front bezel 17
- Install the front bezel 18
- Remove the chassis cover 19
- Install the chassis cover 19
- Operations 21 21
- Operations 22 22
- Optimum environment 23
- Temperature requirements 24
- Power requirements 24
- Server warnings and cautions 25
- Installing hardware options 25
- Setup 26 26
- • Dedicated iLO connector 27
- Configure the drive 30
- Install the operating system 30
- Complete the system setup 30
- Registering the server 31
- Setup 32 32
- Complete the switch setup 37
- Introduction 38
- Bezel faceplate 38
- Drive options 40
- Controller options 42
- Optical drive option 46
- Memory options 48
- HP SmartMemory 49
- DIMM identification 49
- ECC memory 50
- Installing a DIMM 51
- Expansion board options 52
- Cabling 57
- Capacitor pack cabling 58
- Optical drive cabling 59
- Front I/O assembly cabling 59
- System fan cabling 60
- Power supply cabling 61
- Server mode 62
- Product QuickSpecs 62
- HP iLO Management 62
- Active Health System 63
- Intelligent Provisioning 64
- HP Insight Diagnostics 65
- Erase Utility 65
- HP Service Pack for ProLiant 67
- HP ROM-Based Setup Utility 67
- Boot options 68
- Utilities and features 69
- Keeping the system current 70
- Software and firmware 71
- Version control 71
- ProLiant servers 71
- Troubleshooting 73
- System battery replacement 74
- Regulatory information 75
- Warranty information 76
- Electrostatic discharge 77
- Specifications 78
- Specification Value 79
- Support and other resources 80
- Customer Self Repair 82
- Reparo feito pelo cliente 84
- Acronyms and abbreviations 88
- Virtual Connect 91
- Version Control Agent 91
- Documentation feedback 92
- Index 93 93
- Index 94 94
- Index 95 95
Manuais e produtos relacionados com Hardware de computador Hp ProLiant MicroServer Gen8
(147 páginas)
(187 páginas)DeVilbiss COMPACT P2-11 manuály
Uživatelské manuály a uživatelské příručky pro Stříkací barva DeVilbiss COMPACT P2-11.
Poskytujeme 2 manuály pdf DeVilbiss COMPACT P2-11 ke stažení zdarma podle typů dokumentů: Uživatelský manuál, Specifikace
Comentários a estes Manuais