Hp ProLiant SL390s G7 Server Manual do Utilizador Página 17
- Página / 85
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Operations 17
Operations
Power down the server
WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment,
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not complete
ly shut off system power. Portions of the power supply and some internal
circuitry remain active until AC power is removed.
IMPORTANT: If installing a hot-plug device, it is not necessary to power down the server.
1. Back up the server data.
2. Shut down the operating system as directed by the operating system documentation.
NOTE: If the operating system automatically places the server in Standby mode, omit the next
step.
3. Press the Power On/Standby button to place the server in Standby mode. When the server activates
Standby power mode, the system power LED changes to amber.
IMPORTANT: Pressing the UID button illuminates the blue UID LEDs on the front and rear panels.
In a rack environment, this feature facilitates locating a server when moving between the front and
rear of the rack.
4. Disconnect the power cords.
The system is now without power.
Removing the server from the chassis
1. Press the latch to release the handle.
2. Rotate the handle to disengage the power connector.
3. Extend the server from the chassis until the release latch catches.
4. While firmly holding the server, press the release button.
- User Guide 1
- Contents 3
- Contents 4 4
- Contents 5 5
- Component identification 6
- Front panel LEDs and buttons 7
- Rear panel components 8
- Rear panel LEDs and buttons 9
- System board components 10
- DIMM slots 11
- System board switches 11
- Hard drive numbering 12
- Battery pack LEDs 13
- GPU location 15
- System fans 16
- Operations 17
- Operations 18 18
- Rack planning resources 19
- Optimum environment 19
- Temperature requirements 20
- Power requirements 21
- Rack warnings 22
- Installing hardware options 22
- Registering the server 25
- Introduction 26
- Drive options 26
- Processor options 27
- Memory configurations 32
- Installing a DIMM 32
- Expansion board options 33
- PCIe riser board option 35
- Cabling 37
- Configuration and utilities 38
- HP ROM-Based Setup Utility 39
- Array Configuration Utility 40
- Management tools 42
- Erase Utility 43
- Redundant ROM support 44
- Diagnostic tools 45
- Keeping the system current 46
- ProLiant Support Packs 47
- Care Pack 47
- Troubleshooting 48
- Symbols on equipment 49
- Warnings 49
- Symptom information 50
- Troubleshooting 51 51
- Service notifications 52
- Loose connections 52
- Server health LEDs 52
- Troubleshooting flowcharts 53
- General diagnosis flowchart 54
- Symptoms: 56
- POST problems flowchart 58
- OS boot problems flowchart 60
- • Corrupted OS 61
- • Redundancy failure 63
- Troubleshooting 64 64
- Troubleshooting 65 65
- System battery 66
- Regulatory information 67
- Electrostatic discharge 68
- Specifications 69
- Support and other resources 70
- Customer Self Repair 72
- Reparo feito pelo cliente 74
- Acronyms and abbreviations 78
- Voltage Regulator Down 81
- Documentation feedback 82
- Index 83 83
- Index 84 84
- Index 85 85
Manuais e produtos relacionados com Hardware de computador Hp ProLiant SL390s G7 Server
(118 páginas)DeVilbiss COMPACT P2-11 manuály
Uživatelské manuály a uživatelské příručky pro Stříkací barva DeVilbiss COMPACT P2-11.
Poskytujeme 2 manuály pdf DeVilbiss COMPACT P2-11 ke stažení zdarma podle typů dokumentů: Uživatelský manuál, Specifikace
Comentários a estes Manuais