Hp DC7800 Manual do Utilizador Página 180

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 276
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 179
4. If you are adding a second SODIMM, remove the SODIMM from the top DIMM1 socket to access
the bottom DIMM3 socket. Press outward on the two latches on each side of the SODIMM (1) then
pull the SODIMM out of the socket (2).
5. Slide the new SODIMM into the socket at approximately a 30° angle (1) then press the SODIMM
down (2) so that the latches lock it in place.
NOTE: A memory module can be installed in only one way. Match the notch on the module with
the tab on the memory socket.
A SODIMM must occupy the DIMM1 (top) socket.
6. Replace the SODIMM in the DIMM1 socket if it was removed.
The computer automatically recognizes the additional memory when you turn on the computer.
168 Chapter 9 Removal and Replacement Procedures Ultra-Slim Desktop (USDT) Chassis
Vista de página 179
1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 275 276

Comentários a estes Manuais

Sem comentários