Hp TC2120 Manual do Utilizador descarregar pdf (Página 38)

Chapter 3 Installing and Configuring

3. Remove the left side cover.

4. Lay the server on its side (components showing).

5. Disconnect the heat sink cooling fan power cable from the connector on the system board.

6. Open the heat sink release latches by pressing down on the latches and unhooking them from the heat sink

bracket. Then, remove the heat sink by lifting it. See Figure 3-15.

Removing the Processor

1. If you have not removed the heat sink cooling fan assembly, do so now before continuing.

2. Open the ZIF (Zero Insertion Force) lever completely to allow removal of the processor.

Figure 3-15. Removing Heat Sink and Cooling Fan

CAUTION Wear a wrist-strap and use a static-dissipating work surface

connected to the chassis when handling components. Ensure

the metal of the wrist-strap contacts your skin.

Latch

LatchHook

Hook

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 124 125

Sem comentários

Hp TC2120 Manual do Utilizador Página 38