Hp TX1000 Manual do Utilizador descarregar pdf (Página 77)

Before removing the fan/heat sink assembly, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power cord.

Remove the battery (see

Battery on page 36).

Remove the following components:

Hard drive (see

Hard drive on page 38)

Memory module compartment cover (see

Memory module on page 43)

Optical drive (see

Optical drive on page 42)

Keyboard (see

Keyboard on page 47)

Switch cover (see

Switch cover on page 50)

Display assembly (see

Display assembly on page 52)

Top cover (see

Top cover on page 59)

Power switch assembly (see

Power switch assembly on page 63)

System board (see

System board on page 66)

Remove the fan/heat assembly:

1. Disconnect the fan cable (1) from the system board.

2. Remove the four Phillips PM2.0×5.0 screws (2) that secure the fan/heat sink assembly to the system

board.

72 Chapter 5 Removal and replacement procedures ENWW

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 130 131

Sem comentários

Hp TX1000 Manual do Utilizador Página 77