Hp DV3 Manual do Utilizador descarregar pdf (Página 114)

4–52 Maintenance and Service Guide

Removal and replacement procedures

Power connector and cable

Before removing the power connector and cable, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,

and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then

unplugging the AC adapter from the computer.

4. Remove the battery (see “Battery” on page 7).

5. Remove the following components:

a. Hard drive (see “Hard drive” on page 8)

b. Optical drive (see “Optical drive” on page 23)

c. Keyboard (see “Keyboard” on page 25)

d. Switch cover (see “Switch cover” on page 29)

e. Speaker assembly (see “Speaker assembly” on page 31)

f. Display assembly (see “Display assembly” on page 32).

g. Top cover (see “Top cover” on page 44).

Remove the power connector and cable:

1. Remove the power connector 1 from the clip 2 built into the base enclosure.

2. Remove the power connector and cable.

Reverse this procedure to install the power connector and cable.

Description Spare part number

Power connector and cable 531810-001

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 181 182

Sem comentários

Hp DV3 Manual do Utilizador Página 114