HP C110 Manual do Utilizador descarregar pdf (Página 28)

C100_110-160_180.FB 26 Tue Jul 16 06:36:50 1996

Installing the New Main Tray Assembly

Install the new C160/C180 main tray assembly, as described in the following

procedure:

1 Align the main tray assembly with the chassis and slide it into place, as shown in

Figure 15.

Figure 15 Installing the New Main Tray Assembly

2 Slide the main tray in until you feel it make contact with the internal connectors.

3 Push firmly and evenly on the main tray assembly to make sure that all connec-

tors are fully seated.

4 Start all four thumb screws loosely, then tighten them firmly. See Figure 15.

NOTICE: To maintain regulatory agency compliance, verify that the main tray is

fully seated and all four thumb screws are completely tightened.

Thumb Screws

Thumb

Screws

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34

Sem comentários

HP C110 Manual do Utilizador Página 28