HP J7949E Manual do Utilizador descarregar pdf (Página 84)

ENWW TCP/IP Configuration 84

AppleTalk

Command Description

appletalk Enables or disables AppleTalk (EtherTalk) protocol

operation on the print server. 0 disables, 1 (default) enables.

For example,

appletalk 0 will disable AppleTalk operation

Name (Read-only parameter) The name of the printer on the

AppleTalk network. A number after the name indicates that

there are multiple devices with this name, and this is the Nth

instance of the name.

Print Type (Read-only parameter) Specifies the AppleTalk network

printer type reported by the Jetdirect print server. Up to three

print types may be reported.

Zone (Read-only parameter) The name of the AppleTalk network

zone on which the printer is located.

Phase (Read-only parameter) AppleTalk phase 2 (P2) is

preconfigured on the HP Jetdirect print server.

Status (Read-only parameter) Indicates the current AppleTalk

configuration status.

READY: Indicates the HP Jetdirect print server is awaiting

data.

DISABLED: Indicates that AppleTalk was manually

disabled.

INITIALIZING: Indicates that the print server is registering

the node address or name. An additional status message

may also be displayed.

DLC/LLC

Command Description

dlc/llc-config Enables or disables DLC/LLC protocol operation on the print

server. 0 disables, 1 (default) enables. For example,

dlc/llc-config 0 will disable DLC/LLC operation.

strict-8022 Controls DLC/LLC protocol interpretation:

0 (default): disables, that is, provides loose interpretation.

1: enables, that is, provides strict interpretation).

Table 3.4 Telnet Commands and Parameters (12 of 13)

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 231 232

Sem comentários

HP J7949E Manual do Utilizador Página 84