Hp PROCURVE 530 Manual do Utilizador descarregar pdf (Página 28)

2-10

Installing the Access Point 530

Installation Procedures

Installing the

Access Point 530

Suspended Ceiling Mounting

You can mount the access point on a suspended ceiling T-rail as shown in the

illustrations on the next page.

1. Attach the access point to its mounting bracket by sliding the unit down

onto the bracket so that the four protrusions on the bracket enter the four

recess slots on the bottom of the access point. Push the access point firmly

down onto the bracket until clicks into a locked position.

2. Position the access point with its mounting bracket at a slight angle to the

suspended ceiling T-rail.

3. Push the access point firmly onto the T-rail, then turn counterclockwise

until the rail snaps into the clips on the access point’s bracket.

6-32 machine

screws

Mounting the Bracket on a Standard Electrical Box

Look for the “THIS SIDE UP”

marking in this area

Route cable through

this groove

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 113 114

Sem comentários

Hp PROCURVE 530 Manual do Utilizador Página 28