HP 3C339 Manual do Utilizador descarregar pdf (Página 11)

3 Connecting to a Windows NT Server 3.51

Windows for Workgroups Ver. 3.11

3 Connecting to a Windows NT Server 3.51

Windows for

Workgroups Ver. 3.11

Requirements

• HP Vectra VE7/VE8 with DOS and MS-Windows for Workgroups 3.11 in-

stalled.

• 3COM Token Ring 3C339 card and drivers disk ver. 5.0.

DOS ODI - File Name: Tl3c3x9.dos Size: 52KB Date: 2/28/97

• DOS and MS-Windows for Workgroups 3.11 media.

• Microsoft Windows NT Server 3.51 machine that supports Net BEUI,

NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.

Device Configuration

• I/O Base Address DC00

• Interrupt Request Level 10

Procedure

1 With the HP Vectra VE7/VE8 set to PNP enabled, turn the machine off

install the 3COM 3C339 adapter card into an PCI slot.

2 Power on the machine and allow it to boot to a DOS prompt.

3 Insert the 3COM drivers diskette and execute 3C3x9CFG.EXE.

4 Select “CONFIGURE NIC,” and verify the resource settings listed above

under the heading “Device Configuration.”

5 If changes are required, save those changes and exit.

6 Remove the 3COM cards driver diskette and insert Netware client for DOS

and MS-Windows disk 1.

7 Execute INSTALL.EXE.

8 Specify the settings as listed below:

❒ C:\NWCLIENT

❒ Yes

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

Sem comentários

HP 3C339 Manual do Utilizador Página 11