HP FCA2404 Manual do Utilizador Página 41
- Página / 62
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Diagnostic and Configuration Utilities
41AB232A PCI-X Host Bus Adapter Installation Guide
Table 8 lists the current parameters that you can set.
Table 8: Drive Parameters
Parameter Description
AbortStatus = 0xn Values from 0x00 – 0xFF. Controls NT SRB error status
for general Abort conditions.
Default = SRB_STATUS_BUS_RESET (0x0E) which will
not cause the current NT class driver to throttle down I/O
performance after four of these errors have been
received (on a per-LUN basis).
ALTOV = n Values are in milliseconds from 1 to 15. Default = 15.
ARBTOV = n Values are milliseconds from 500 to 10000. Default =
1000. Represents FC_AL arbitration time-out prior to LIP.
Class = n Values from 0 to 2. Default = 2. Controls which Fibre
Channel Class will be used: 0 = Class 1, 1 = Class 2, 2 =
Class 3.
EDTOV = n Values are in milliseconds from 500 to 10000. Default =
1000. Represents error detect time-out value prior to LIP.
EnableDPC = n Values 0 or 1. Default = 0. 0 = process I/O completion at
interrupt level, 1 = process at DPC level.
FrameSizeMSB = n Values from 1 – 8. Default = 8. Controls the upper byte of
the receive FrameSize if issued in PLOGI. This allows the
FrameSize be constrained on 256 byte increments from
256 (1) – 2048 (8).
HardALPA = 0xn Values from 0x01 – 0xEF. Default = 0x01 allows the HBA
use a hard assigned loop address. NOTE: Only valid
ALPAs can be used (see Table 9 on page 44).
LinkTimeOut = n Values are in seconds from 1 – 500. Default = 60.
Controls the time-out at which link no longer busy with
requests but issues SELECTION_TIMEOUT error status.
LogErrors = n Values 0 or 1. Default = 0. 0 = don’t log general
HBA/drive errors. 1 = use Event Log to log general
errors.
NodeTimeOut = n Values are in seconds from 1–255.
Default = 10. Controls the time-out at which a formerly
logged-in node will issue SELECTION_TIMEOUT error
status to an I/O request.
- AB232A PCI-X Host Bus Adapter 1
- Third Edition (June 2004) 2
- Part Number: AA–RU1ZC–TE 2
- Contents 3
- About this Guide 7
- Overview 8
- Conventions 9
- Equipment Symbols 10
- Getting Help 11
- HP Storage Website 12
- HP Authorized Reseller 12
- Adapter Features 13
- Product Description 14
- Performance Specifications 16
- Installation 17
- Hardware Requirements 18
- Recording Reference Numbers 19
- 11. Attach media: 21
- Verifying the Installation 22
- Configuration Guidelines 23
- Installing the SCSI Miniport 25
- Device Driver Installation 26
- Troubleshooting 29
- POST Conditions and Results 30
- Using The Event Viewer 31
- Diagnostic and Configuration 37
- Utilities 37
- Using LightPulse Utility 38
- Modify the Driver Parameters 40
- Set Up Persistent Binding 44
- Prerequisites 45
- Setting Up Persistent Binding 45
- Test Host Bus Adapters 47
- Modify Test Options 48
- Restart Host Bus Adapters 48
- Input/Output 48
- Maintenance 48
- Show Host Bus Adapter Info 49
- Quit the LightPulse Utility 49
- Regulatory Compliance 51
- Class A Equipment 52
- States Only 52
- Network and Serial Cables 53
- IEC EMC Statement (Worldwide) 53
- European Union Notice 55
- Japanese Notice 56
- Harmonics Conformance (Japan) 57
- Laser Safety 58
- Electrostatic Discharge 59
- Grounding Methods 60
Manuais e produtos relacionados com Placas/adaptadores de interface HP FCA2404
(86 páginas)DeVilbiss COMPACT P2-11 manuály
Uživatelské manuály a uživatelské příručky pro Stříkací barva DeVilbiss COMPACT P2-11.
Poskytujeme 2 manuály pdf DeVilbiss COMPACT P2-11 ke stažení zdarma podle typů dokumentů: Uživatelský manuál, Specifikace
Comentários a estes Manuais