
b. Release the microphone receivers (2) from the clips built into the display enclosure.
c. Remove the microphone receivers and cables. The microphone receivers and cables are
available using spare part number 596043-001.
Reverse this procedure to install the processor.
Top cover
Description Spare part number
Top cover (includes pointing stick buttons and cable, and TouchPad and cable) 597580-001
Fingerprint reader (includes cable) 607815-001
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 47), and then remove the following components:
a. Optical drive (see
Optical drive on page 54) or secondary hard drive (see Secondary hard
drive on page 55)
b. Keyboard (see
Keyboard on page 63)
c. Switch cover (see
Switch cover on page 67)
d. Display assembly (see
Display assembly on page 76)
86 Chapter 4 Removal and replacement procedures
Comentários a estes Manuais