Hp OmniBook 5500 Notebook PC Manual do Utilizador descarregar pdf (Página 75)

6. Replace the shield.

7. Replace the cable cover.

8. Plug in the ac adapter and dock the OmniBook.

9. If the card isn’t detected, contact the card manufacturer.

To install a PCI card

You can add one PCI card to the docking system. If you install a PCI card, you can

only install one ISA card—and it must be in the lower ISA slot.

Caution

Before removing the card from its bag, equalize static electricity by touching

the bag and the port replicator’s metal back plate at the same time. Handle the

card by its edges. Avoid touching electronic components.

1. Undock the OmniBook and unplug the ac adapter from the docking system.

2. Remove the cable cover.

3. Slide the metal shield from the base.

If the shield is difficult to slide, you can insert a pen or small screwdriver into the

gap between the shield and base and gently work the shield loose. Be sure to

loosen the shield evenly on both the right and left sides before attempting to

remove it.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 89 90

Sem comentários

Hp OmniBook 5500 Notebook PC Manual do Utilizador Página 75