HP OmniBook 800CS/CT Manual do Utilizador descarregar pdf (Página 72)

Hard Disk Drive

(End User Replaceable)

Required Equipment

• Torx #6 screwdriver

Removal Procedure

1. Exit all applications, including Windows.

2. Turn the OmniBook off and remove the battery and ac adapter.

3. Use a Torx-T6 screwdriver to remove the two keyboard screws and the three hard drive

screws (the exact location of the hard drive screws vary with the manufacturer of hard drive).

See Figure 19.

4. Turn the OmniBook over and open the cover. Grasp the top edge of the Keyboard and fold

out gently. Note – the Keyboard Flex Cables do not need to be disconnected. See Figure

20 on page 54.

CAUTION:

To avoid damage due to keyboard flex cables, do not pull the cables out of

the connectors or pick up the OmniBook while the keyboard is still

connected.

Figure 19 - Hard Drive Screws

Hard Drive Screws

M3.0x0.5x5.0mm

1.5 - 3.5 in-lb

(p/n 0515-2847)

Keyboard Screws

M2.0x0.4x7.0mm

1.5-3.5 in-lb

(p/n 0515-2846)

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 118 119

Sem comentários

HP OmniBook 800CS/CT Manual do Utilizador Página 72