HP Pavilion xu Notebook PC series Guia do Utilizador descarregar pdf (Página 106)

Add-On Devices

Replacing the Hard Disk Drive

106 Reference Guide

2. Notice that the hard drive has a pin connector attachment at one end. Carefully

remove this connector from the end of the drive. Work alternately at each end so that

the connector slides off evenly without bending the connector pins.

3. Carefully put the pin connector attachment back onto the pins on the end of the new

hard drive. Work alternately at each end so that the connector slides on evenly

without bending the connector pins.

4. Insert the connector through the end of the holder, and lower the drive into the holder.

5. Reinstall all four screws into the holder and drive case.

To prepare a new hard disk drive

When you install a new hard disk drive, you also need to prepare it to be able to work

with your computer.

• If you want to restore the Windows software and operating system that were

originally installed on your computer, you can do so using the Recovery CD that also

came with your computer. See “To recover the factory installation of your hard disk”

on page 142.

• If you want to use the hard disk with other than the original software and operating

system, prepare the hard disk as described in the Corporate Evaluator’s Guide,

available at the HP Customer Care web site (www.hp.com/go/support).

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 180 181

Sem comentários

HP Pavilion xu Notebook PC series Guia do Utilizador Página 106