HP AE40L Manual do Utilizador

OPERATOR’S MANUAL & PARTS LIST AERA-vator MODEL AE40L FIRST PRODUCTS INC. 164 Oakridge Church Rd. Tifton, Georgia 31794 U.S.A. Phone (229)

locked to the tractor PTO and gearbox shafts. Drive shields must turn freely on the drive-line. • See that all shields are correctly installed. •

OPERATOR MAINTENANCE • Check gearbox oil level before first operation and every 200 hours of operation thereafter. With frame level, remove oil plug

AE40L SERVICE INSTRUCTIONS ROTOR SHAFT I. Removal & Disassembly (Clean the machine thoroughly with a pressure washer) A. Removal of Rotor Sha

C. Rotor Disassembly. 1. With a pry bar remove the external seals (see Figure 8) on both sides. Generally, seals are damaged and are n

B. Assembly of Rotor Shaft. 1. Rotate the adapters in each rotor so the timing marks (see Figure 10) are phased 180 degrees apart with h

E. After installing the belts and cover, run the machine and check for loose or improperly installed components. TINE REPLACEMENT Assemble tines to

SEEDER CALIBRATION CALIBRATION IT IS THE RESPONSIBILITY OF THE OPERATOR TO ENSURE THAT EACH BATCH OF SEED IS PROPERLY CALIBRATED IN THE SEEDER PRIOR

II. CALIBRATION PROCEDURE Establish the desired application rate based on lbs. per 1000 sq. ft. (Divide lbs. per acre by 43.6 to convert to lbs. per

WARRANTY INFORMATION ONE YEAR LIMITED WARRANTY FIRST PRODUCTS INC. WARRANTS THIS PRODUCT TO BE FREE OF DEFECTS IN MATERIALS AND WORKMANSHIP FOR A

91027654133181115AERA-vator12AE-4018WARNINGTO PREVENT A THROWN OBJECT HAZARD,DO NOT ENGAGE PTO IN LIFTED POSITION.TO PREVENT A ROLL OVER HAZARD, DONOT

1INTRODUCTION Thank you for purchasing an AREA-vator. This piece of equipment has been carefully engi-neered and manufactured to provide years of re

124173520619783126281829305111312~242516242515142222202134WARNINGTO PREVENT A THROWN OBJECT HAZARD,DO NOT ENGAGE PTO IN LIFTED POSITION.TO PREVENT A R

291161161221132028312618163215223024202621272310222120171914324598116AERA-vator7TIFTON, GA. 31794P.O. BOX 1425RODUCTS INC.RODUCTS INC.IRSTIRST25CAUTIO

ROTOR ASSEMBLY21ORDER NO.AE81-010AE50-029AE50-058AE80-027HW20020G5ZPCHW32020G8ZPAE60T003AE81-011AE50-0053895764ITEM NO.21EXTERNAL ROTOR SEALROTOR ASSE

22KEEP AWAYALL DRIVELINE GUARDS,TRACTORDO NOT OPERATE WITHOUTCONTACT CAN CAUSE DEATHROTATING DRIVELINEFREELY ON DRIVELINEDRIVELINES GUARDS THAT TURNAT

1111028714121322179181920451516621153~~~2323HW01012032G5ZPCHW03010024G5ZPCSMOOTHING ROLLERHW24016GBZPCORDER NO.HW22012G5ZPCHW30016TAZPHW01016080G5ZPCH

GROOMING RAKE & BRUSHORDER NO. AE82-03064ITEM NO.132ORDER NO.16DESCRIPTIONORDER NO.ITEM NO.14DESCRIPTION24AE50-159AE80-131AE23-205AE50-178AE50-192

40L SEEDER MOUNTING251=1ITEMPART NO.DESCRIPTIONQTY.ITEMPART NO.DESCRIPTIONQTY.123451667 8HOSE LOCATION FROM DRIVE END:SPOUTS 1 THRU 8 & 16 THRU 23

109077589-22GUARD, ELECTRIC MOTOR1ITEMPART NO.DESCRIPTIONQTYRED +RED +BROWN -BLACK -GREEN +2L05-0001-000ELECTRIC SWITCH1309073589-9MOUNTING BRACKET ,

128421-C2RHOPPER1228426919-C1RCOVER13140692-C2END BEARING24M05-0773-000GASKET2509063146-C1RETAINER262894-20C1BOTTOM AND SLIDE, 42" 23 SPOUTS17208

2157349861415111213161710SEEDER HOPPER28

2TABLE OF CONTENTS SAFETY SYMBOLS...

29NOTES

SPECIFICATIONS AE40L WEIGHT w/ROLLER WITHOUT SEEDER 586 LBS WEIGHT WITH SEEDER (EMPTY HOPPER) 705 LBS OVERALL WIDTH WITHOUT SEEDER 44” OVERALL WID

SAFETY SYMBOLS This is a standard safety alert symbol meaning ATTENTION ! BECOME ALERT ! YOUR SAFETY IS INVOLVED ! CAUTION Indicates

Located on both ends of machine.AE50-1132.) DO NOT ALLOW RIDERS ON IMPLEMENT.Part No. AE50-075FRAME PINCH POINTHAZARD KEEP AWAYAE50-075CAUTIONPart No.

OPERATION SAFETY • Your Safety Is Always First! Familiarize yourself with the safety symbols and decals on pages 3 and 4. • All operators should

6 • Consult your tractor Operator's Manual regarding operation on slopes. Do not lift the unit while the tractor is moving (or parked) sideways

UNDERSTANDING HOW THE SWING HITCH OPERATES (PRIOR TO HITCHING TO TRACTOR) With the swing stand lowered and the swing mast rearward to disengage the s

AERA-vator to tilt backwards when lifting allowing gravity to assist the swing chains in align-ing the unit with the tractor. DO NOT ADD ADDITIONAL W