Hp 2310e 23 inch Diagonal LCD Monitor Manual do Utilizador

2310e and 2310ei LCD MonitorsUser Guide

Safety Precautions●Use only a power source and connection compatible with this monitor, as indicated on the label/back plate of the monitor.●Be sure t

Cleaning the Monitor1. Turn off the monitor and unplug the power cord from the back of the unit.2. Dust the monitor by wiping the screen and the cabin

3 Setting Up the MonitorUnpacking the Monitor1. Unpack the monitor. Make sure all contents are included. Store the packing box.2. Turn off the compute

2. Slide the pedestal into the slot on the base (1) and tighten the large screw on the bottom of thebase (2) to secure the pedestal to the base.Figure

Connecting Monitor CablesCAUTION: Before connecting cables to the monitor, ensure that the computer and monitor arepowered off.The video source is det

Connecting the DisplayPort Video CableConnect one end of the DisplayPort Digital Input cable to the back of the monitor and the other endconnector to

Connecting the Power Cord1. Follow all electrical and power warningsWARNING! To reduce the risk of electric shock or damage to your equipment:Do not d

Turning on the Monitor1. Press the power button on the computer to turn it on.2. Press the power button on the front of the monitor to turn it on.CAUT

2. Adjust the tilt by moving the top edge of the monitor either toward or away from you, withouttouching the screen.Figure 3-7 Tilt AdjustmentAdjusti

4 Operating the MonitorCD Software and UtilitiesThe CD that is included with this monitor contains drivers and software that you can install on yourco

© 2010 Hewlett-Packard DevelopmentCompany, L.P.Microsoft, Windows, and Windows Vista areeither trademarks or registered trademarksof Microsoft Corpora

Front-Panel ControlsControl buttons are located on the bottom right of the monitor. The buttons are represented by iconsthat become illuminated when t

Using the On-Screen Display (OSD)Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. Toaccess the OSD, do th

Icon Main Menu Options Sub-menu Options Description sRGB Sets your screen colors to adapt to thecolor standards used in the imagetechnology industr

Icon Main Menu Options Sub-menu Options Description OSD Transparency Adjust to view the backgroundinformation through the OSD. OSD Timeout Sets the

Icon Main Menu Options Sub-menu Options Description DDC/CI Support Allows the computer to control someOSD menu features such as Brightness,Contrast,

Icon Main Menu Options Sub-menu Options DescriptionSource Control Selects the video input signal. thefactory default by priority is DisplayPort,DVI,

●Check Video Cable — Indicates a video input cable is not properly connected to the computeror monitor.●OSD Lockout — The OSD can be enabled or disabl

A TroubleshootingSolving Common ProblemsThe following table lists possible problems, the possible cause of each problem, and therecommended solutions:

Problem SolutionNo Plug and Play. In order for the Plug and Play feature of the monitor to work, you need a computer andgraphic card that are compatib

Locating the Rating LabelThe rating label on the monitor provides the product number and serial number. You may need thesenumbers when contacting HP a

About This GuideThis guide provides information on setting up the monitor, installing drivers, using the on-screendisplay menu, troubleshooting and te

B Technical SpecificationsAll specifications represent the typical specifications provided by HP's component manufacturers;actual performance may

Preset Video ModesThe monitor automatically recognizes many preset video input modes that will appear properly sizedand centered on the screen.Table B

LCD Monitor Quality and Pixel PolicyYour LCD Monitor uses high-precision technology, manufactured according to high standards, to helpguarantee troubl

C Agency Regulatory NoticesFederal Communications Commission NoticeThis equipment has been tested and found to comply with the limits for a Class B di

Hewlett Packard CompanyP. O. Box 692000, Mail Stop 530113Houston, Texas 77269-2000Or, call 1-800-HP-INVENT (1-800 474-6836)For questions regarding thi

For non-telecommunications products and for EUharmonized telecommunications products, suchas Bluetooth® within power class below 10mW.For EU non-har

and current rating marked on the product. In addition, the cross-sectional area of the wire must be aminimum of 0.75 mm² or 18 AWG, and the length of

pressing the power/sleep button, receiving an input signal from an input device, receiving an inputsignal from a network connection with the Wake On L

11363-200611363-2006Turkey EEE RegulationIn Conformity with the EEE RegulationEEE Yönetmeliğine Uygundur32 Appendix C Agency Regulatory Notices ENWW

iv About This Guide ENWW

Table of contents1 Product Features ...

Appendix A Troubleshooting ...

1 Product FeaturesHP 2310e/2310ei LCD MonitorsFigure 1-1 HP 2310e/2310ei LCD MonitorsThe HP 2310e/2310ei LCD (liquid crystal display) monitors have a

●Swivel adjustment●Plug and Play capability, if supported by your computer system●On-screen display (OSD) adjustments for ease of setup and screen opt

2 Safety and Maintenance GuidelinesImportant Safety InformationA power cord is included with the monitor. If another cord is used, use only a power so