HP Kyocera Extended Driver Manual do Utilizador descarregar pdf (Página 94)

To set stapler settings:

1 From the application’s Print dialog box, access Properties. (Select Print from the File

menu and select

Properties).

2On the

Output tab, select Finisher (Face-down) from the Output to list.

3 Select the

Staple check box in the Finishing Options area. Select one of the following as

the stapling position:

Upper Left, Upper Right, or Booklet.

4Click

[...] on the right of the stapling position. The Staple Settings dialog box appears.

Specify the number of pages to staple by adjusting the arrows in the

Staple Count area.

• All Sheets (maximum of 50): Staples and outputs all pages of documents that have 50

pages or less. If the document being printed has 51 or more pages, it cannot be stapled.

For example, If the document being printed has 58 pages, it cannot be stapled.

• After every sheet(s): Parameter separates documents into sets with a specific number

of pages, then staples and outputs them. You can designate from 2 to 50 pages in each

stapled set. Even if there are fewer than the specified number of pages, the document

will be stapled. For example, if stapling has been specified for every 50 pages and a

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 144 145

Sem comentários

HP Kyocera Extended Driver Manual do Utilizador Página 94