HP PSC 1310 Series Manual do Utilizador descarregar pdf (Página 39)

user guide

maintain your hp psc

Note: It is normal to see ink buildup in the print cartridge slots.

4 Remove the new print cartridge from its packaging and, being careful to

touch only the bright pink plastic tab, gently remove the plastic tape to

uncover the ink nozzles.

Caution! Do not touch the copper-colored contacts or ink nozzles.

After you have removed the plastic tape, install the print cartridge

immediately to prevent the ink from drying in the nozzles.

5 Hold the black print cartridge with the HP label on top. Slide the print

cartridge at a slight angle into the ULJKW side of the print carriage.

Press firmly until the print cartridge snaps into place.

Caution! Do not attempt to push the cartridge straight into the slot.

It must slide in at a slight angle.

6 Hold the tri-color print cartridge with the HP label on top. Slide the print

cartridge at a slight angle into the OHIWside of the print carriage.

Press firmly until the print cartridge snaps into place.

Caution! Do not attempt to push the cartridge straight into the slot.

It must slide in at a slight angle.

Note: You must install ERWK print cartridges in order for your HP psc to work.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 77 78

Sem comentários

HP PSC 1310 Series Manual do Utilizador Página 39