HP AA-RSB6B-TE Manual do Utilizador descarregar pdf (Página 56)

Installing the SAN Switch 2/8

56 hp StorageWorks SAN Switch 2/8 Installation Guide

4. Connect the cables to the SFPs as appropriate to the fabric topology, by

positioning each cable so that the key (the ridge on one side of the cable

connector) is aligned with the slot in the SFP. See Figure 17.

Figure 17: Inserting a cable into an SFP

Note: The cable is keyed so that it can only be inserted correctly into the SFP. If the

cable does not slide in easily, check the orientation.

Verifying Operation

After making the appropriate connections, as outlined in this chapter, use these

steps to verify that the switch is running properly.

1. Access your browser.

2. At the URL address window type, http://your switch IP

address.

3. Press Enter.

4. If connected properly, the name of your switch appears (in green) in the Web

browser window, indicating Healthy/OK.

SHR-2499B

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 103 104

Sem comentários

HP AA-RSB6B-TE Manual do Utilizador Página 56