HP 3.1.X Manual do Utilizador descarregar pdf (Página 119)

Switch Admin Window

119Web Tools Version 3.1.x/4.1.x User Guide

4. Select the desired speed for the corresponding port (see “About the Port

Setting Tab” on page 115).

5. Click the Apply button.

Assigning a Name to a Port

You can optionally name a port by performing the following steps.

1. Access the Switch Admin Window (see “About the Switch Admin Window”

on page 92).

2. Enter the admin user name and password.

3. Select the Port Setting tab.

4. Click in the Name column; select the field that corresponds to the Port you

want to name.

5. Enter a name for the port. Port names can be from 0 to 32 alphanumeric

characters. Port names do not need to be unique.

6. Click the Apply button.

Disabling a Port over Reboots

To optionally disable a port, so that it is disabled over reboots perform the

following steps.

1. Access the Switch Admin Window (see “About the Switch Admin Window”

on page 92).

2. Enter the admin user name and password.

3. Select the Port Setting tab.

4. Select the slot and port you want to disable over reboots.

5. Check the Persistent Disable checkbox for that port.

6. Click the Apply button.

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 306 307

Sem comentários

HP 3.1.X Manual do Utilizador Página 119