HP AD583C Manual do Utilizador descarregar pdf (Página 15)

e1200-320 4Gb Fibre Channel Interface Card user and service guide 15

4. Remove the cables from the robotics controller (see Figure 5).

Figure 5 Removing cables from the robotics controller

Removing an existing interface card

If you are replacing a card that is already installed in the library, save the configuration settings using the

FTP user interface: ftp -> login -> bin -> get *.cfg <path><filename>.cfg. See ”Using the FTP interface” on

page 89.

To remove the interface card:

1. From the back of the library, locate the card to be removed (see Figure 6).

2. Using a #1 Phillips screwdriver, loosen the captive screw in each black ejector handle.

3. Push the ejector handles outward, and pull the card out of the library.

Figure 6 Removing an interface card from the library

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 131 132

Sem comentários

HP AD583C Manual do Utilizador Página 15