HP ProCurve 800 Network Access Controller series Manual de Instalação descarregar pdf (Página 17)

2-9

Quick Install

Installing the Appliance

Quick Install

4. Connect the Network Cables

Connect the network cables, described under “Cabling Infrastructure”

(page 5), from the network devices or your patch panels to the fixed RJ-45

ports on the front of the ProCurve NAC 800.

For deployment as a standalone RADIUS sever,

or for the RADIUS server with

IDM agent, insert the network cable in the LAN port (LAN Port 1) on the front

of the box.

Figure 6. ProCurve NAC 800 Front Panel Port Connections

For deployment of the endpoint integrity fea

tures, connections wil

l vary based

on the deployment method you use. The network connection options are

referenced on the front panel of the appliance, as shown in the figure above.

5. (Optional) Connect a Console to the Appliance

The ProCurve NAC 800 has an easy to use console interface for performing

appliance management tasks including the following:

■ Modify the appliance’s configuration to improve network security

■ Read the event log and access diagnostic tools to help in troubleshooting

■ Download new software to the appliance.

■ Add passwords to control access to the ProCurve NAC 800 from the

console, Web interface, and network management stations

The console can be accessed by connecting the serial cable provided to a PC

or VT-100 te

rminal, to be used as a console.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 43 44

Sem comentários

HP ProCurve 800 Network Access Controller series Manual de Instalação Página 17