HP VMA-series Memory Arrays Manual do Utilizador descarregar pdf (Página 9)

Connecting the Laptop to the VMA32xx Array with both serial and Ethernet

links

For the VMA32xx firmware upgrade process, there are two connections required from the Laptop

to the VMA Array being upgraded:

• A serial connection made to the serial management port on the array.

• A direct connect Ethernet connection made to the Ethernet management port on the VMA

Array.

1. Ensure the VMA Array is powered on by connecting the power cords to the VMA Array.

2. Connect the Ethernet cable from the Ethernet port on the Laptop to the Ethernet port on the

back of the VMA Array.

3. Connect a serial null modem cable from the serial port on the Laptop to the serial CLI port on

the VMA Array.

a. If the Laptop has a serial port, use a Female/Female serial null modem cable to connect

directly to the serial CLI network port on the VMA Array.

b. If the Laptop does not have a serial port, use a usb-to-serial converter cable along with

a Female/Female serial null modem cable to connect from a USB port in the Laptop to

the serial CLI network port on the VMA Array.

Configuring the Laptop to communicate with the VMA Array

There are two connections, both serial and Ethernet, that you need to configure and verify that

they are working. The first communication path to establish is the serial connection. With the serial

connection, you can obtain the IP address of the VMA Array Ethernet port for use when configuring

the Ethernet connection.

Connecting the Laptop to the VMA32xx Array with both serial and Ethernet links 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 28 29

Sem comentários

HP VMA-series Memory Arrays Manual do Utilizador Página 9