Only one side of the page prints when the two-sided printing option is
enabled
Verify the following:
• The photo paper is not curled, if you are printing on two-sided photo paper.
Photo paper should be flat before printing. See storing and handling photo
paper for more information.
• The paper size that is selected in the Page Setup dialog box is supported by
the duplexer.
• The paper type that is selected in the Paper Type/Quality panel is supported
by the duplexer.
16.3.6 Auto Two-Sided Print Accessory with Small Paper Tray
specifications
Dimensions when attached to printer
219.3 mm (8.63 in) tall x 320.5 mm (12.62 in) wide x 142.1 mm (5.6 in) deep
Duplexing specifications
For duplexing specifications, including skew, media weight, and media sizes for
paper fed into the printer through the printer In tray, see the Automatic Two-Sided
Printing Accessory specifications.
Small paper tray specifications
Media thickness: 7-12 mils
Media sizes:
• Size range:
• Width: 81.3 to 106 mm (3.2 to 4.17 in)
• Length: 116.8 to 304.8 mm (4.6 to 12 in)
• Cards:
• 10x15 cm, 10x15 cm with tab
• 4x6 in, 4x6 in with tab
• A6, 105x148 mm
• Index card, 4x6 in.
• L, 89x127 mm
• Photo paper:
• 10x15 cm, 10x15 cm with tab
HP Deskjet 6500 series printers User's Guide
165
Comentários a estes Manuais