HP 7800 Guia do Utilizador descarregar pdf (Página 31)

CAUTION: After removing an expansion card, you must replace it with a new card or expansion

slot cover for proper cooling of internal components during operation.

12. To install a new expansion card, slide the card under the slot cover retention latch and press the

card down into the socket on the system board.

Figure 2-17 Installing an Expansion Card

NOTE: When installing an expansion card, press firmly on the card so that the whole connector

seats properly in the expansion card slot.

13. Rotate the slot cover retention latch back in place to secure the expansion card.

14. Connect external cables to the installed card, if needed. Connect internal cables to the system

board, if needed.

15. Replace the access panel.

16. If the computer was on a stand, replace the stand.

17. Reconnect the power cord and turn on the computer.

18. Lock any security devices that were disengaged when the access panel was removed.

19. Reconfigure the computer, if necessary. Refer to the Computer Setup (F10) Utility Guide for

instructions on using Computer Setup.

ENWW Removing or Installing an Expansion Card 25

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 64 65

Sem comentários

HP 7800 Guia do Utilizador Página 31