HP A2969A Manual do Utilizador descarregar pdf (Página 47)

SCSI

bus

The collection of SCSI signal lines that interconnect SCSI devices and adapters.

SCSI ID

SCSI identification. The bit-significant representation of the SCSI address referring to one

of the bus signal lines DB (7 - 0,15 - 8).

See also SCSI address.

slot

The physical place in the back of the computer where an adapter plugs in.

Each slot has a

number, which in its hexidecimal form is used as part of the hardware address of the

device. See adapter slot

terminator

A device that contains a resistive network to terminate the peripheral end of a SCSI bus.

The peripheral end of the SCSI bus may not need a terminator if the last peripheral device

on the bus already contains SCSI termination resistors.

termination

To complete the bus circuitry at each end of a SCSI bus, the electrical lines (at each end

only) must be terminated with a resistive network. The HP-HSC Fast/Wide Differential

SCSI adapter contains termination resistor packs on the adapter and must be located at

one end of the SCSI bus. See also terminator.

Glossary 47

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 53 54 55

Sem comentários

HP A2969A Manual do Utilizador Página 47