HP EVA P6000 Manual do Utilizador descarregar pdf (Página 10)

Figure 6. Validation of the destination HP 3PAR StoreServ system

After the selection of the vdisks, one has to determine the characteristics of the VVs on the HP 3PAR StoreServ system

to which the vdisks are migrated. The size of a destination VV on HP 3PAR StoreServ system does not need to be specified

as this value will be equal to that of its corresponding vdisk on the EVA P6000 source system. What needs to be specified

is its provisioning type (full or thin) and the CPG for the VV on the destination system. Figure 7 shows the wizard screen

for selecting the provisioning type and the CPG for every destination VV. The wizard proposes a CPG for every VV that is

migrated, with a RAID level and physical disk type that are identical or as close as possible to the characteristics of the

vdisk on the source system. The choice for the CPG by the wizard can be overruled per destination volume individually or

for all of them in one go. Changing the RAID protection level and the physical disk type (SSD, FC, NL) for the VV compared

to the vdisk on the EVA is possible by selecting the appropriate CPG for it. Note the HP 3PAR StoreServ system does not

actively create CPGs that imitate the characteristics of the vdisks selected for migration; the administrator has to create

appropriate CPGs prior to starting the Online Import wizard. The selected CPG also determines the availability level (Port,

Cage, or Magazine) of the destination VV.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Sem comentários

HP EVA P6000 Manual do Utilizador Página 10