• Net weight
– Maximum configuration: 72.6 kg (160 lb.)
Mechanical design and packaging of the HP Integrity rx5670 server
The exploded view illustrates the location of major components as well as the mechanical and architectural
features of the Integrity rx5670 server. The server is partitioned into two main electrical partitions—the system
partition, including baseboard, CPU board, and memory carrier boards; and the I/O partition, consisting of
PCI-X I/O slots, core I/O, and the management processor.
Figure 8. Major components of the HP Integrity rx5670 server
Intel Itanium 2
processors
Memory carrier 1
24 slots
Ultra160 SCSI
hot-plug disks
PCI-X I/O
slots
Redundant,
hot-swap fans
Redundant,
hot-swap power
supplies
Core I/O
Ultra160 SCSI,
10/100/1000Base-TX
RS-232 and LAN
console
Removable
media slot
Memory carrier 2
24 slots
Three hot-swap power supply bays are located in the lower left corner of the server (when viewed from the front).
To the right of the front panel, a peripheral bay provides space for four hot-plug disks and one removable
media device (either DVD-ROM or DDS-3). Directly above the power supply bays is the first of eight hot-swap
cooling fans.
The right side of the system houses the I/O backplane and I/O card bay. There are twelve PCI-X/PCI slots in the
I/O card bay. Two or three of these slots are factory-loaded with core I/O cards, depending on the choice of
operating system. The remaining nine or ten slots are available for a wide variety of optional I/O adapter cards.
Two pairs of fans provide cooling for the I/O bay as well as the peripheral bay.
An opening at the top of the server provides access to the CPU board, memory carriers, and system baseboard. In
aggregate, these boards provide support for up to four CPUs and 48 DIMMs.
Racking density
The Integrity rx5670 server is designed to provide performance density that easily adapts to different
environments. At seven EIA units per server, up to five servers can be installed into a single 2-meter HP cabinet.
The Integrity rx5670 server is supported in HP Rack System/E and 10000 series racks. The server is also
supported in a variety of third-party, non-HP racks and cabinets. Refer to the HP Server Configuration Guide for
the latest list of qualified third-party racks.
Note: Dimensions for rack configuration are as follows: height = 12.2 inches (31.1 cm), depth = 30.5 inches
(77.5 cm), width = 19 inches (48.2 cm).
17
(144 páginas)
(59 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais