HP Integrity rx2600 Especificações descarregar pdf (Página 22)

22 HP Integrity rx2600 server and HP workstation zx6000 Operation and Maintenance Guide

System Configuration

Please select a boot option

[

your OS]

EFI Shell [Built-in]

Boot option maintenance menu

Security/Password Menu

Use up and down arrows to change option(s).

Use Enter to select an option.

NOTE: The server pauses for seven seconds to enable you to change the boot option before

booting to the default OS. To change the pause duration, select

Set Auto Boot TimeOut from

the Boot Options Maintenance Menu.

Use the up or down arrow keys to highlight an option and press

Enter to activate a selection.

Remote Access

To access the EFI remotely, follow these steps:

1. With the server turned off, connect the serial cable provided with your server (HP part

number 5182-4794) or a compatible cable to the serial console port (port A) on the rear panel

of the server, and to your remote device.

2. Configure the terminal emulation software with these settings:

❏ Baud rate: 9600

❏ Bits: 8

❏ Parity: None

❏ Stop Bits: 1 (one)

❏ Flow Control: XON/XOFF

3. Using the terminal emulation software, connect to the server with a direct connection.

NOTE: The default terminal emulation type is VT100+. You can change this setting from the

EFI Boot Options Maintenance Menu.

4. Power on the server and follow the steps in the next section to access the EFI.

Using the EFI Shell

To access the EFI shell, follow these steps:

1. When the EFI boot option screen displays, use the arrow keys to highlight

EFI Shell and press

Enter.

NOTE: You have seven seconds to change the boot option before the server boots to the first

option in the list. To change the order of boot options, see “Using the Boot Option Maintenance

Menu” (page 30).

2. A list of file systems (drives and partitions), and block devices on hard drives is displayed.

For example:

Device mapping table

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 165 166

Sem comentários

HP Integrity rx2600 Especificações Página 22