HP NetServer LXr 8500 Manual do Utilizador descarregar pdf (Página 4)

Model HP NetServer Rack Storage/12 - D5989B or C

plus two D6025B or two D6025C SCSI cards for each cabinet

Status SCSI ID 5 (fixed)

Disk SCSI IDs 0 – 3, 8 – 15 (fixed)

Disk drives: Same as HP Rack Storage/12FC

Cables Any HP LVD SCSI cables from the following list:

1 meter D7131A

2.5 meter D6020A

5 meter D6982A

10 meter D6983A

LANs

Intra-cluster (Heartbeat) LAN Client LAN

LAN connection HP D5954A crossover cable or any

equivalent

Any LAN

The intra-cluster LAN may only be

used for cluster node communication

via a crossover cable. It may not be

used for client communication.

NIC:

Model HP D5013B (10/100TX PCI) Any that is on both the HP Tested

Products List and the Microsoft

Hardware Compatibility List.

Driver Hptxnt5.sys 4.01.67 (Windows 2000

A.S. CD) or later

For SPOFless, use hptxnt5.sys

version 4.2.27.0 (Navigator L.18.04.5)

or later

Vendor supported driver.

NOTE If the Client and Intra-

cluster LANs are the same model

(D5013A/B), the Client LAN must

use the same driver as the Intra-

cluster LAN.

No. of NICs 1 1 minimum

For SPOFless, 2 NICs configured

as a fault-tolerant team are

recommended.

Shared Storage Cabling

This part of the guide defines the allowable cabling configurations for clusters using the HP NetServer LXr 8500,

one HP Rack Storage/12FC and two, optional SCSI HP Rack Storage/12’s. Only these cabling configurations and

these cables are supported.

1 2 3 4 5 6 7 8 9

Sem comentários

HP NetServer LXr 8500 Manual do Utilizador Página 4