HP Pavilion Elite E-470f Guia de Instalação descarregar pdf (Página 10)

Step 4: Mounting

After setting the jumpers, mount the hard drive in your system. The DTTA drive can be mounted with any

of its six surfaces facing down (right side up, upside down, sideways, etc.). See below for mounting hole

locations. Be sure to treat the disk drive very carefully and gently.

You must ensure that the drive has sufficient air flow. Mount the drive in the system using the 4 6-32 UNC

screws (included). The maximum screw length is 3.5 mm for the side holes and 6 mm for the bottom

holes. Mount the drive securely enough to prevent it from excessive motion or vibration.

If you are mounting your drive in a 5” bay, you may need to purchase mounting brackets from your

computer manufacturer for the drive to be mounted securely.

Mounting hole locations

Page 10 Version 3.0

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Sem comentários

HP Pavilion Elite E-470f Guia de Instalação Página 10