The current release of HP Integrity rx7640 Server/HP UX 11i v2 supports hardware partitioning.
Hardware based partition configuration changes may require a reboot of the partition depending
upon the configuration change. The reboot of the partition only affects the partition that is being
reconfigured. The other partition defined in the chassis is not affected and will continue to
execute without interruption. In a future HP UX release, dynamic hard partitions will be
supported. Dynamic partitions imply that partition configuration changes do not require a reboot
of the partition.
The HP Integrity rx7640 Server can be divided into two independent hardware partitions. In a
partitioned configuration, system resources such as cell boards, I/O slots, core I/O, and disks,
are evenly split between the two partitions (the removable media device is dedicated to partition
1). There is no flexibility to otherwise divide these components. For example, it is not possible
to include 12 I/O slots in partition 0 and 4 I/O slots in partition 1; the split must be even.
The table below summarizes the resource split between hardware partitions.
Cells
(required)
I/O slots
Core I/O
(required)
Disk/Media Bays
Partition 0
Cell 0
7 1
2/0
Partition 1
Cell 1
7 1
2/1
Software Partitioning
HP Integrity rx7640 servers support virtual partitioning (vPars) to the single processor level similar to support on HP 9000
servers with HP UX 11i v1. With vPars, a user will be able to support up to four separate virtual partitions each with an
instance of HP UX within each hard partition. VPars will provide many of the features of nPars but without the electrical
isolation and support for hardware failures that nPars provides.
HP Virtual machines is supported on the rx7640 server. HP Virtual Machines:
increases server utilization
enables server consolidation
provides rapid deployment of new environments (a requirement for test and development environments)
enhances the HP Virtual Server Environment by providing soft partitioning with shared I/O, sub-CPU granularity,
and built-in dynamic resourcing for all Integrity servers
HP System Insight
Manager
HP Systems Insight Manager (SIM) is the central point of administration for management
applications that address the Integrity rx7640 and rx8640 servers management requirements.
HP SIM delivers powerful monitoring and control, notifying the administrator of potential
hardware or software problems before they occur. It also provides inventory-reporting
capabilities that dramatically reduce the time and effort required to track server assets. HP SIM
provides secure communications as well as role-based security to make certain that its
powerful capabilities are kept secure from unauthorized users.
HP-UX
For most updated HP-UX information please see:
www.hp.com/go/hpux
HP Integrity Essentials for HP-UX 11i are advanced plug-ins to HP SIM that provide
modular, integrated system management software for complete HP Integrity server
management. It integrates with many other HP-UX-specific system management tools,
including the following tools available on Integrity servers
Ignite-UX addresses the need for HP-UX system administrators to perform fast
QuickSpecs
HP Integrity rx7640 Server
Configuration
DA - 12470 Worldwide QuickSpecs — Version 25 — 5/8/2009
Page 22
(77 páginas)
(86 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais