Configuration
ConfigurationConfiguration
Configuration
The HP 9000 rp7440 Server is a symmetrical multiprocessing (SMP) server supporting up to eight high
performance dual core HP PA RISC PA 8900 (1.068 GHz, 64 MB cache, 533 MHz FSB). The HP 9000
rp7440 is based on the HP sx2000 chipset.
The rp7440 can be configured as a single SMP server or divided into two smaller, hardware partitioned
(nPars), logical servers.
Cell Boards
Cell BoardsCell Boards
Cell Boards
A minimum of one and a maximum of two cells can be ordered in an HP 9000 rp7440 Server. Each cell
can be purchased with up to four active dual core HP PA 8900 processors or in combination with Instant
Capacity processors.
The HP 9000 rp7440 and rp8440 Servers share the same cell board.These same cell boards can be
upgraded to be used in HP Integrity rx7640 and rx8640 Servers for in-box upgrades. The
rp7410/rp7420/rx7620 cell boards cannot be carried forward to the rp7440 server.
Cell Details
Cell DetailsCell Details
Cell Details
4 processor slots (supporting up to eight processor cores)
HP sx2000 cell controller
16 DDR-2 Memory DIMM slots
DC DC Power converters
Manageability and Processor Dependent Hardware Circuitry
Cell Board Configuration
Cell Board ConfigurationCell Board Configuration
Cell Board Configuration
Rules
RulesRules
Rules
Cell boards are ordered individually
Minimum: 1 cell board
Maximum: 2 cell boards
Cell slot 1 must be loaded first
Dual core HP PA-RISC
Dual core HP PA-RISCDual core HP PA-RISC
Dual core HP PA-RISC
PA-8900 Processors
PA-8900 ProcessorsPA-8900 Processors
PA-8900 Processors
Details
DetailsDetails
Details
1.068 GHz
Level 2 cache: 64 MB
Level 2 cache: .0.75 MB instr + 0.75 MB data
Single bit cache error correction
44 bit physical addressing
64 bit virtual addressing
4 GB maximum page size
Processor Configuration
Processor ConfigurationProcessor Configuration
Processor Configuration
Rules
RulesRules
Rules
The HP PA-RISC PA-8900 processors have two processors core per processor module.
There must be at least one active processors core (non iCAP) on each active cell board.
Activation of iCAP processors cores can be done one core at a time customers may order and
upgrade the PA-8900 processor in increments of at least one core (in this case the other core in a
processor must be iCAP).
On each cell board, processors must be installed in the following sequence 0, 2, 1, 3
QuickSpecs
HP 9000 rp7440 Server
HP 9000 rp7440 ServerHP 9000 rp7440 Server
HP 9000 rp7440 Server
Configuration
DA - 12696 Worldwide — Version 4 — March 3, 2008
Page 5
(12 páginas)
(2 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais