HP S10 Manual do Utilizador descarregar pdf (Página 12)

_________________________________________________________________________________________________________________________________________________________

*The pictures may differ depending on the type of PersonalScope

2. Auto power-off mode

Select the desired off time: 15 minutes, 1 hour or infinite (no auto

power off).

G Notes:

• Before power-off, the scope holds the last screen.

• The auto power-off timer is factory-set to 15min at first

power-on or after a reset

• Selecting a slow time base (equal or slower than 1min/div)

will disable the auto power off.

• If „Never“is selected the backlight will remain always on if

activated. (Only for HPS40).

3. Display mode

Dynamic: The screen layout changes automatically to show

the best signal resolution, depending on X position shift and

the position of the markers. See also “using the markers”

Manual: The screen layout remains fixed according to your

selection.

4. RS232 send mode. (Only for HPS40)

ASCII: a file with settings and samples (relative value 0 to

255) is send after power on or during roll mode.

This setting is normally used in conjunction with a terminal

program.

Binary: As above, but data are output in a binary form. Use

this setting with special software, check our web site.

Fig 15

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 28 29

Comentários a estes Manuais

Sem comentários

HP S10 Manual do Utilizador Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Barebones PC/estação de trabalho HP S10