HP Vectra XA5 Guia do Utilizador descarregar pdf (Página 12)

HP Vectra XA 5/xxx PC

Network Board

The Ethernet 10/100 BT PCI board is a proprietary PCI network board, with

two network connectors.

If the user complains of poor network performance, check whether the 100

BaseT connector is being used on a 10 BaseT network. (Doing so causes the

100 BaseT connector to switch automatically to a back-up 10 BaseT mode of

operation, but with many retries and the consequent poor performance.)

Connector Properties Configuration needs

10 BT Remote power-on (RPO) and

Remote wake-up (RWU)

Must have cable plugged between the remote start connector on

the network board and the external start connector on the system

board.

Power-on integrated network field set to Enabled.

10 Mbits per second operation No requirements

100 BT Remote wake-up (RWU) Suspend wake-up.

Power-on integrated network field set to Enabled.

External cable not needed

100 Mbits per second operation No requirements

Remote start

10 BaseT RJ-45 UTP connector

100 BaseT RJ-45 UTP connector

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18

Sem comentários

HP Vectra XA5 Guia do Utilizador Página 12