HP Vectra XE310 Guia de Resolução de Problemas descarregar pdf (Página 17)

Upgrading and Replacing PC Hardware

Replacing the Floppy Drive

WARNING For your safety, disconnect the power cord and all external cables.

1 Switch off the PC, disconnect the power cord and remove the PC’s side panel and air flow guide (refer

“Removing and Replacing the Side Panel & Air Flow Guide” on page 12).

2 Press the tab on the hard disk drive/floppy disk drive tray and pull the tray out part of the way.

Press here

3 Disconnect all cables at the back of the floppy disk drive and hard disk drive.

4 Remove the drive tray from the PC.

5 Remove the two floppy drive fixing screws (one on either side of the drive tray), noting carefully the

position of these screws.

6 Slide the floppy drive out through the front of the tray.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Sem comentários

HP Vectra XE310 Guia de Resolução de Problemas Página 17