
NVIDIA Nforce Professional 3000 Series
NVIDIA Nforce Professional 3000 SeriesNVIDIA Nforce Professional 3000 Series
NVIDIA Nforce Professional 3000 Series
DDR2 SDRAM ECC REGISTERED MEMORY
DDR2 SDRAM ECC REGISTERED MEMORYDDR2 SDRAM ECC REGISTERED MEMORY
DDR2 SDRAM ECC REGISTERED MEMORY
This chart does not represent all possible memory configurations. Each AMD Opteron processor has an integrated memory
controller that supports ECC Registered 667 MHz (PC2 5300P) DDR2 or ECC Registered 533 MHz (PC2 4200) DDR2 memory.
Main memory is directly connected to the processor through the Direct Connect Architecture. There are 8 DIMM slots in total, with 4
DIMM slots per processor, each processor offering a memory bandwidth transfer rate up to 10.2 GB/s. Over 32 GB requires dual
CPUs, and will require 8 GB DIMMS (when available).
Memory must be added in pairs. Match DIMM pairs by size and type. Use only HP tested and validated memory.
The memory sockets are laid out on the mainboard as below:
Memory configurations for the HP xw9400 Workstation:
In a single processor configuration, install the first DIMM pair in socket set 1 (blue sockets), and the 2nd DIMM pair in socket set 3
(black socket).
In a dual processor configuration, install the first DIMM pair in socket set 1 (blue sockets), the 2nd DIMM pair in socket set 2 (blue
sockets) and, if required, the 3rd pair in socket set 3 (black sockets) and the 4th pair in socket set 4 (black sockets).
MAXIMUM MEMORY
MAXIMUM MEMORYMAXIMUM MEMORY
MAXIMUM MEMORY
Supports up to 64 GB of DDR2 SDRAM, in a configuration of 32 GB per processor (over 32 GB requires dual CPUs and Quad
Ranked DIMMS when supported).
POSSIBLE MEMORY CONFIGURATIONS
POSSIBLE MEMORY CONFIGURATIONSPOSSIBLE MEMORY CONFIGURATIONS
POSSIBLE MEMORY CONFIGURATIONS
Not all memory configurations possible are represented below.
QuickSpecs
HP xw9400 Workstation
HP xw9400 WorkstationHP xw9400 Workstation
HP xw9400 Workstation
Memory
DA - 12594 Worldwide — Version 13 — November 5, 2007
Page 15
Comentários a estes Manuais