HP Z820 Series Manual do Utilizador descarregar pdf (Página 10)

Page 10 of 22 Joe Conforti – Avid Technology – Aug 8th, 2014

Rev F

B.) Required system BIOS settings for AVID environments:

Note: The HP Thunderbolt I/O HBA and the HP Z Turbo Drive require minimum BIOS ver 3.69 or later

Hyper-Threading Setting:

Please Note: CPU Hyper-threading should be enabled in all configurations per the chart below. It is

currently enabled by default by HP

Z820 Required system BIOS changes:

1. Verify CPU Processors are set to Hyper-Threading – Set per chart above.

2. Set Memory NUMA – Disable

3. Set Runtime Power Management - Disable

4. Set Idle Power Savings - Normal

Z820 Optional system BIOS change:

1. Set Intel Turbo Mode** – Disable

** Only required if connecting USB audio I/O devices. This setting will eliminate any audio

“motor-boating” or audio “popping” which may be experienced with USB audio I/O devices.

Set Z820 Required system BIOS changes:

- During boot up press F10 at the HP splash screen to invoke Set Up.

- Select the Advanced tab

- Select Device Options <Enter>

- Select Hyper-Threading

- Verify setting is Enable

 If Hyper-Threading is set for Disable then it must be changed to Enable

- Hi F10 to save the Hyper-Threading setting

- Select the Power tab

- Select OS Power Management <return>

- Select Runtime Power Management

- Default setting is Enable

 Change this setting from Enable to Disable

- Select Idle Power Savings

- Default setting is Extended

 Change this setting from Extended to Normal

- Hi F10 to save the Runtime Power Management and Idle Power Savings settings

Hyper-Threading Setting

Software Version

Dual 6-core CPU

Dual 8-core CPU

Media Composer v5.5.x , v6.x , v7.x

Symphony v5.5.x , v6.x , v7.x

NewsCutter v9.5.x , v10.x , v11.x

Enabled (Mandatory)

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

Sem comentários

HP Z820 Series Manual do Utilizador Página 10