HP 3210v Guia de Configuração descarregar pdf (Página 9)

HP All-in-One • 9

a Remove the yellow plug from the back of the device.

b Connect one end of the Ethernet cable to the Ethernet port

on the back of the device.

c Connect the other end of the Ethernet cable to the hub/

router/switch. If the cable is not long enough, you can

purchase a longer cable.

Important: Do not connect the Ethernet cable to a cable

modem.

You must have a working network. If you already

connected the USB cable, do not connect the Ethernet

cable.

Section B: Ethernet (wired) network

Connect the Ethernet cable

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

HP 3210v Guia de Configuração Página 9