HP 4100GL Manual do Utilizador descarregar pdf (Página 193)

Configuring and Monitoring Port Security

Port Security Command Options and Operation

For information on the individual control parameters, see the Port Security

Parameter table on page 7-7.

Specifying Authorized Devices and Intrusion Responses. This example

configures port A1 to automatically accept the first device (MAC address) it

detects as the only authorized device for that port. (The default device limit

is 1.) It also configures the port to send an alarm to a network management

station and disable itself if an intruder is detected on the port.

HPswitch(config)# port-security a1 learn-mode static

action send-disable

The next example does the same as the preceding example, except that it

specifies a MAC address of 0c0090-123456 as the authorized device instead of

allowing the port to automatically assign the first device it detects as an

authorized device.

HPswitch(config)# port-security a1 learn-mode static

mac-address 0c0090-123456 action send-disable

This example configures port A5 to:

 Allow two MAC addresses, 00c100-7fec00 and 0060b0-889e00, as the

authorized devices

 Send an alarm to a management station if an intruder is detected on

the port

HPswitch(config)# port-security a5 learn-mode static

address-limit 2 mac-address 00c100-7fec00 0060b0-889e00

action send-alarm

If you manually configure authorized devices (MAC addresses) and/or an

alarm action on a port, those settings remain unless you either manually

change them or the switch is reset to its factory-default configuration. You can

“turn off” authorized devices on a port by configuring the port to continuous

Learn Mode, but subsequently reconfiguring the port to static Learn Mode

restores those authorized devices.

Adding an Authorized Device to a Port. To simply add a device (MAC

address) to a port’s existing Authorized Addresses list, enter the port number

with the mac-address parameter and the device’s MAC address. This assumes

that Learn Mode is set to static and the Authorized Addresses list is not full

(as determined by the current Address Limit value). For example, suppose

port A1 allows two authorized devices, but has only one device in its Autho-

rized Address list:

7-11

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 227 228

Comentários a estes Manuais

Sem comentários

Modelos	Tipo de documento
C20-258	Ficha de datos Conceptronic 2,5" Harddisk Box Mini Violet USB powered, 3 paginas
C05-210	Ficha de datos Conceptronic 3,5 inch USB hard disk box for SATA hard disk, 3 paginas
C05-500	Ficha de datos Conceptronic 2,5 / 3,5 inch hard disk docking station eSATA/USB, 3 paginas
CHD3SATA	Ficha de datos Conceptronic Serial ATA External Hard disk box 3.5 “., 1 paginas
C10-393	Ficha de datos Conceptronic Grab'n'GO 2.5” Hard Disk Box eSATA/USB 2.0, 3 paginas
C05-326	Ficha de datos Conceptronic USB SATA HDD 2.5" BLACK USB powered, 3 paginas
C10-135	Ficha de datos Conceptronic 3,5 inch USB/e-SATA hard disk box, 3 paginas
C05-106	Ficha de datos Conceptronic USB 2.0 & Firewire Harddisk Box 3.5", 1 paginas
C05-324	Ficha de datos Conceptronic 3,5 inch HardDiskBox DualBay, 3 paginas
C20-253	Ficha de datos Conceptronic 2,5" Harddisk Box Mini Blue USB powered, 3 paginas
C05-209	Ficha de datos Conceptronic 2,5 inch USB hard disk box for SATA hard disk, 3 paginas
CHD3U	Ficha de datos Conceptronic USB 2.0 Hard Disk Box 3.5", 1 paginas

HP 4100GL Manual do Utilizador Página 193

Comentários a estes Manuais

Conceptronic C20-150 manuales

Conceptronic C20-150 Ficha de datos (3 paginas)

Tabla de contenidos

Más productos y manuales para Hdd / ssd recintos Conceptronic

HP 4100GL Manual do Utilizador Página 193

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP 4100GL

Conceptronic C20-150 manuales

Conceptronic C20-150 Ficha de datos (3 paginas)

Tabla de contenidos

Más productos y manuales para Hdd / ssd recintos Conceptronic