HP 8/20q Manual do Utilizador descarregar pdf (Página 41)

HP 8/20q Fibre Channel Switch QuickTools Switch Management User Guide 41

Creating a zone set

To create a zone set:

1. Open the Zoning menu and select Edit Zoning to open the Edit Zoning dialog box.

2. Open the Edit menu and select Create Zoneset to open the Create Zoneset dialog box.

3. Enter a name for the zone set, and then click OK. The new zone set name is displayed in the Zonesets

dialog box.

A zone set name must begin with a letter and be no longer than 64 characters. Valid characters are

0–9, A–Z, a–z, _, -, ^, and $.

4. Choose one of the following options to create new zones in a zone set:

• Right-click a zone set and select Create A Zone from the popup menu. In the Create a Zone dialog

box, enter a name for the new zone, and then click OK. The new zone name is displayed in the

Zonesets dialog box.

• Copy an existing zone by dragging a zone into the new zone set. See ”Copying a zone to a zone

set” (page 42).

5. Click Apply to save changes to the zoning database.

Activating and deactivating a zone set

You must activate a zone set to apply its zoning definitions to the fabric. When you activate a zone set, the

switch distributes that zone set to the temporary zoning database on every switch in the fabric. Only one

zone set can be active at one time.

The purpose of the deactivate function is to suspend all fabric zoning which results in free communication

fabric-wide (when Default Zone is set to Allow) or no communication (when Default Zone is set to Deny). It

is not necessary to deactivate the active zone set before activating a new one.

To activate a zone set, open the Zoning menu and select Activate Zoneset to open the Activate Zoneset

dialog box. Select a zone set from the Select Zoneset drop-down list, and click Activate.

To deactivate the active zone set, open the Zoning menu, select Deactivate Zoneset. Acknowledge the

warning about traffic disruption, and click Yes to confirm that you want to deactivate the active zone set.

Renaming a zone set

To rename a zone set:

1. In the Zone Sets tree of the Edit Zoning dialog box, click the zone set to be renamed.

2. Open the Edit menu and select Rename.

3. In the Rename Zoneset dialog box, enter a new name for the zone set.

4. Click OK.

Removing a zone set

Removing a zone set from the database affects the member zones in the following ways.

• Member zones that are members of other zone sets are not affected.

• Zones that are currently not in a zone set are considered to be part of the orphan zone set. The orphan

zone set is not an actual zone set, but rather a way of displaying the zones that are not currently in a

zone set.

To remove a zone set:

1. Select Zoning > Edit Zoning to open the Edit Zoning dialog box.

2. In the Zone Sets tree, select the zone set to be removed.

3. Select Edit > Remove to remove the zone set.

4. Click Apply to save changes to the zoning database.

Alternatively, you may right-click and use shortcut menus to remove a zone set from the database.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 107 108

Comentários a estes Manuais

Sem comentários

HP 8/20q Manual do Utilizador Página 41

Comentários a estes Manuais

Manuais e produtos relacionados com Software HP 8/20q