HP Netserver 5971-0821 Manual do Utilizador descarregar pdf (Página 7)

1 Installation and Setup

The HP Ultra3 Single Channel SCSI Host Bus Adapter enables you to connect

up to 15 SCSI devices—such as hard disk drives, scanners, and CD-ROM

drives—to HP Netservers with 32-bit or 64-bit PCI expansion slots. You can

connect newer Ultra3 and Ultra2 SCSI devices to the two 68-pin Low Voltage

Differential/Single-Ended (LVD/SE) connectors. You can also connect legacy

SCSI devices to the 68-pin and 50-pin internal Single-Ended (SE) connectors.

Figure 1-1. HP Ultra3 Single Channel SCSI Host Bus Adapter

Although the HP Ultra3 SCSI Host Bus Adapter is a 64-bit PCI host bus

adapter, it also works in a 32-bit PCI slot. When installed in a 32-bit PCI slot,

the host bus adapter automatically runs in the slower 32-bit mode. This

installation guide explains how to:

• Install the HP Ultra3 SCSI host bus adapter

• Set up SCSI devices

• Connect SCSI devices

50-pin Internal SCSI SE Controller

68-pin External LVD/SE Connector

68-pin Internal LVD/SE Connector

68-pin Internal SE Connector

1 2 3 4 5 6 7 8 9 10 11 12 ... 119 120

Sem comentários

HP Netserver 5971-0821 Manual do Utilizador Página 7