HP PROCURVE 8212ZL Manual do Utilizador descarregar pdf (Página 113)

102

Enhancements

Release K.13.16 Enhancements

You can also use the no-tag-added parameter with ACL traffic filtering when mirroring IP traffic.

Figure 21. Mirroring Commands with the no-tag-added Option

Figure 22. Example of a Currently Configured Mirroring Summary on a Source Switch

Syntax: [no] interface <port-num | trunk-name | mesh> monitor all <in | out | both> mirror <session-num>

[no-tag-added]

Assigns a mirroring source to a previously configured mirroring session on a

source switch. It specifies the port, trunk, and/or mesh source to use, the direction

of traffic to mirror, and the session identifier.

Note: If configuring a mesh, designate it using the literal string “mesh”.

[no-tag-added] Prevents tagging of a mirrored copy of an outbound packet

Syntax: [no] interface <port-num | trunk-name | mesh> monitor ip access-group <acl-name> in mirror

<session-num> [no-tag-added]

Assigns a mirroring source to a previously configured mirroring session on a

source switch. It specifies the ports, trunk name, or mesh to use, the previously

configured ACL to use for selecting traffic to mirror, and the session identifier.

Note: If configuring a mesh, designate it using the literal string “mesh”.

[no-tag-added] Prevents tagging of a mirrored copy of an outbound packet

ProCurve(config)#interface 3 monitor all in mirror 1 no-tag-added

ProCurve(config)#interface 2 monitor ip access-group A in mirror 2 no-tag-added

ProCurve(config)#interface mesh monitor all both mirror 1 no-tag-added

ProCurve# show monitor

Network Monitoring

Sessions Status Type Sources ACL

-------- ----------- ----- ------- ---

1 active port 3 no

2 active port 2 yes

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 218 219

Sem comentários

HP PROCURVE 8212ZL Manual do Utilizador Página 113